Glen Burnie, Anne Arundel County

Water features in Glen Burnie, MD

Live in Glen Burnie long enough and you stop hearing the planes coming into BWI. Until you have friends over on the patio and have to pause the conversation. That is the reason behind most of the water features Glen Burnie homeowners call us about. Moving water is one of the few sounds that covers a jet without being louder than it.

M.E.V. Outdoor Solutions is a family-run, Latino-owned hardscape company started in 2016 by three brothers, based up in Joppa. Since the Key Bridge went down we come through the tunnel instead, and we build water features in Glen Burnie with the same masonry crew that does our patios, walls and outdoor rooms.

Glen Burnie waterfalls that drown out BWI flight paths

Sound masking is about volume and spread. A wide, low fall over flat stone makes a soft hiss that fills the patio. A narrow, tall drop makes a sharper splash you hear across the yard. We set the drop height and flow during the first test run and adjust it with you sitting where you normally sit.

A backyard waterfall installation aimed at noise goes close to the seating, between you and the flight path, not out by the back fence where it looks nice and does nothing.

Pondless waterfalls on flat, sandy Glen Burnie lots

Most yards off Ritchie Highway and Crain Highway are flat, with sandy ground that drains fast. No slope means we build one. A low berm behind the falls gives the water somewhere to fall from, and the reservoir sits under gravel at the base.

As a pondless waterfall installer, we prefer this design for flat lots: no open water, little upkeep, and the berm holds its shape. Where it needs a crisp edge, we face it with a low stone wall so the soil stays put after a hard rain.

Outdoor fountain installation for Glen Burnie Cape Cods and ranchers

A lot of the neighborhoods here are postwar Cape Cods and ranch houses with modest backyards and a concrete slab off the kitchen door. A bubbling urn or a drilled boulder takes up a few square feet and still does the job.

Outdoor fountain installation fits neatly into a slab replacement. When we tear out old concrete for a new paver patio, we set the fountain basin and run power underneath before the pavers go down.

Spillways and fountains beside Glen Burnie pools

Above-ground and in-ground pools are common here, and a stone spillway is the easiest way to make one look built-in. We do not build pools; we partner with pool builders and handle the hardscape around the pool, from coping to the spillway wall.

If the deck around your pool is cracked or the old pavers have settled, we can redo the pool patio at the same time so the new stone matches.

Fire, grilling and running water on one Glen Burnie patio

Water on one side, flame on the other. A fountain pairs well with a stone fire pit, and both can tie into an outdoor kitchen with a Bull or Blaze grill. Our average project takes about four days on site, so a full backyard is usually broken into stages you can plan around.

What Glen Burnie gets from a three-brother hardscape crew

Search water feature installation near me in Anne Arundel County and you will find pond shops and landscape crews. We are a custom water feature contractor that builds in stone first, and the owners are on the job. Any company working in your yard should show you their licensing and insurance, and we go over ours at the estimate.

  • Masons, not a pond supply store

    The stone, the walls and the patio around your feature come from one crew.

  • Free estimates for Glen Burnie water features

    We price your fountain or waterfall at no cost, and financing is available on bigger builds.

  • Full days on every visit

    Because we travel in, we stage materials ahead and spend the whole day building.

Glen Burnie and nearby towns for water feature work

Glen Burnie sits near the north end of the B&A Trail, and we cover the towns along and around it. Farther down the line, see our Annapolis water feature work. On the Howard County side, there is our Ellicott City water features page.

Pasadena, Severn, Linthicum, Millersville and Severna Park are all close. A water feature installation near me search from any of them reaches the same crew and the same free estimate.

  • Glen Burnie
  • Pasadena
  • Severn
  • Linthicum
  • Millersville
  • Severna Park

Common Glen Burnie water feature questions

What Anne Arundel homeowners ask before they book a visit.

Will a waterfall really cover airplane noise in Glen Burnie?

It will not silence a jet, but placed close to your seating it masks a lot of it. We tune the flow during the test run so you can hear the difference before we leave.

My yard is completely flat. Can I still have a waterfall?

Yes. We build a low berm behind the falls to create the drop and hide the reservoir under gravel at the base.

Can a fountain go on a small Glen Burnie lot?

Yes. An urn or boulder fountain needs only a few square feet and a covered outdoor outlet.

Can you add a spillway to my existing pool?

Often, yes. We build the stone spillway and the hardscape around it. Pool plumbing changes are handled with the pool builders we partner with.

Does sandy soil cause problems for a water feature?

Sandy soil drains well but shifts, so we compact the base hard and pad the liner to keep everything level.

How much upkeep does a pondless waterfall need?

Top it up in hot weather, rake leaves off the stone, and pull the pump for winter. There is no pond to clean.

How long does a water feature take to install?

Our average project is about four days on site. A fountain is quicker; a waterfall with a new patio takes longer.

Is there a charge for a Glen Burnie estimate?

No. Water feature estimates are free. The only evaluation we charge for is drainage, at $30.

Set up your free Glen Burnie water feature visit

Pick the spot where the noise bothers you most. We will price a fountain or waterfall that fixes it.